Series SBM pumps are single stage,
double suction with horizontally split casings. They are suitable for pumping
unsettled water, clean water, non-drinkable or hydrocarbon at a temperature not
exceeded 105℃,for SBML
is not exceeded 80℃.
Series SBM pumps are available for
capacities of 68- 11O00m³/h and heads of 7-200m. they are adoptable in water works, irrigation and drainage pumping
stations, power stations, industrial water supply systems, fire. fighting systems, arine applications as well as general
applications in refineries, etc.
The nomenclature of the model is
based on its size and characteristic. For example:
Series SBM pumps are single
stage, axially split volute easing pump with double flow radial impeller, for horizontal and verical installation.
Drive shaft end of the horizontal pump can be optionally on the left or right
The main components of SBM
pump are listed as follows: lower half easing, upper half easing, impeller, shaft,
wearing rings, shaft sleeves, bearing housings and couplings.
The volute casing is splited
on the horizontal center line with the suction and discharge nozzles east
integral with the lower half. The upper easing is accurately located on the
lower half by the use of dowel pins. It can be removed tb inspect the interior
of the pump without disturbing the pipe connections or pump